Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Video / Video

Why Your Drill Clicks When the Screw Stops

· Video · 36s · By Howloft

The screw stops, but the motor keeps turning. What makes a cordless drill click? This cutaway follows a representative spring-loaded ball-and-ramp torque clutch: the balls hold a reaction ring until resistance reaches the selected limit, then ride over the ramps as the ring slips. Turning the numbered collar higher increases spring preload in this

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Timestamps & transcript

Follow the timestamps on YouTube, or read the English captions.

  1. 0:00 — Inside the drill clutch
  2. 0:16 — How the clutch slips
Read the English transcript

[0:00] The screw stops. The motor keeps turning. So what’s making that clicking sound? Inside this type of drill clutch, springs press steel balls against ramps on a gear ring. The balls hold the ring still, letting the gearbox turn the screw.

[0:16] When resistance reaches the set limit, the balls ride over the ramps and the ring slips. The screw can stop while the motor keeps turning. Turn the numbered collar higher, and the springs push harder. It takes more torque to slip.

[0:31] That’s what those clicks mean: the clutch is limiting torque.

More about this video

Turning the numbered collar higher increases spring preload in this design. The numbers are relative settings, not universal newton-metre values. The clutch limits torque; it does not guarantee zero torque or prevent every stripped screw. Designs vary, and this is different from an impact wrench's hammer mechanism.