Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Full video / Everyday technology

Your Bank Card Has No Battery. So How Does It Work?

· Full video · 2:18 · By Howloft

Follow how a contactless card receives power, exchanges data with a reader, and participates in a payment.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Follow the mechanism
  1. Reader fieldThe terminal supplies the magnetic field.
  2. Card wakesThe antenna and chip receive operating energy.
  3. Data exchangeThe card and terminal communicate.

The radio interaction is shown here; bank authorization is a separate stage.

Transcript

Read along with the English captions.

    Read the English transcript

    Transcribed from the original English narration. Wording may contain transcription errors.

    You tap your bank card, the terminal beeps. Payment approved. But wait, your card has no battery. So how did the tiny computer inside it wake up? The answer is sitting right in front of it, the payment terminal. Let's slow that tap down. Hidden beneath the plastic is a thin loop of metal connected to a tiny chip. The loop is an antenna and it has a second job, collecting power.

    Inside the terminal, another coil creates a rapidly changing magnetic field. When your card comes close, that changing field induces a voltage in its antenna. The card turns that into usable electricity and with that tiny burst of borrowed power, the chip wakes up. This is electromagnetic induction, the same basic principle behind wireless charging, but your card isn't charging a battery. It uses the energy right there and then. Now, the terminal has a question for the card.

    It changes its field to send instructions to the chip. The card has to answer, but without a battery, how does it talk back? It changes the electrical load on its antenna. Those tiny changes affect the field around the reader, and the terminal detects them as data. Power in. Information back. All through the same invisible connection. Next comes the security check. Using a secret key stored inside it.

    The chip creates a transaction specific code called a cryptogram that helps the payment system check that the transaction is genuine and makes a recorded transaction harder to reuse as a new purchase. For a typical online payment, the request travels through the payment network to your card issuer. The issuer checks the information and decides whether to approve it. The answer travels back to the terminal and then the beep.

    If you insert the card instead, those metal contacts give it a wired connection for power and data. So in one tap, the terminal lends your card power, the chip answers and the payment request makes its journey to your bank. No battery, no charging, just a tiny computer waking up when you need it.

    Power crosses a small gap

    The terminal produces an alternating magnetic field. The card antenna couples to that field, supplying energy to its chip. A passive card therefore needs no battery for this interaction.

    Power and data share the link

    The reader sends commands, and the card can signal its response by changing the electrical load seen through the coupling. EMV defines how compatible payment cards and terminals communicate. A typical online payment then involves authorization through the payment system; the tap alone is not bank approval.

    Explore the science

    Go further with these engineering and manufacturer references.