Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Short / Everyday engineering

Why This Glass Survives a Hammer, But Not a Snip

· Short · 32s · By Howloft

A Prince Rupert’s drop stores opposing stresses in its surface and core. Damage to the stressed tail can let a crack trigger rapid fragmentation.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Timestamps & transcript

Follow the timestamps on YouTube, or read the English captions.

  1. 0:00 — A hammer couldn’t break it.
  2. 0:11 — it leaves the outside squeezed tight
Read the English transcript

[0:00] A hammer couldn’t break it. One tiny snip did. This is a Prince Rupert’s drop. Its surface cools first. As the centre cools and shrinks,

[0:11] it leaves the outside squeezed tight and the inside under tension. That compressed surface resists cracks. But snap the tail, and a crack races

[0:21] into the core, releasing stored energy. The whole drop shatters. Subscribe to Howloft for the hidden science inside everyday things.

Cooling leaves hidden stress

When molten glass is quenched in water, the surface cools first. As the interior cools and shrinks, the outer region is left in compression and the core in tension. The compressed surface helps resist cracks.

The tail can release the stored energy

Breaking a stressed part of the tail can let a crack reach the core and trigger rapid fragmentation. The drop is not indestructible, and an arbitrary snip at a thin tip does not always shatter it. Stress colours indicate compression and tension, not temperature. The CG is an explanation, not a validated fracture simulation or experiment footage.

Your questions, explained.

Do the stress colours show hot and cold glass?

No. They represent compression and tension within the glass, not temperature.

Explore the science

Go further with these engineering and manufacturer references.