Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Short / Everyday engineering

Why the Wrong Key Fits but Won’t Turn

· Short · 23s · By Howloft

A key may enter the right keyway yet leave one pin blocking the shear line. See how the right cuts align the pin splits so the lock plug can rotate.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Timestamps & transcript

Follow the timestamps on YouTube, or read the English captions.

  1. 0:00 — Both keys fit.
  2. 0:12 — to just the right height.
Read the English transcript

[0:00] Both keys fit. Only one turns. This pin blocks the center. The right key lines up every split along this edge. Now it turns.

[0:10] Each cut lifts a pair of pins to just the right height. Even one wrong height blocks the movement. Subscribe to Howloft to see how

[0:20] everyday things work.

Fitting the keyway is not enough

The two keys in the animation fit the same keyway, but their cuts differ at one position. In the simplified five-pin pin-tumbler lock, that wrong cut leaves a pin blocking the shear line.

Aligning the pin splits

The correct key brings each split between a key pin and driver pin into line with the shear line. With those splits aligned, the plug can rotate. The cutaway explains a conventional mechanism rather than every type of lock.

Your questions, explained.

Why can a key slide in but not turn?

It may fit the keyway while its cuts still leave a pin across the shear line, preventing plug rotation.