Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Short / On the move

How a Car Differential Works | Why Wheels Turn at Different Speeds

· Short · 31s · By Howloft

When a car turns, its wheels follow different paths. This episode looks at the differential: the gear arrangement that lets the driven wheels rotate at different speeds. Follow the movement and see the familiar corner from inside the mechanism.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Why the outside wheel must travel farther

When a car turns, the outside wheel follows a larger arc than the inside wheel. If both driven wheels were forced to rotate at the same speed, a tyre would have to slip. A differential transfers drive while allowing the two wheels to turn at different speeds.

What the differential gears do

In a typical bevel-gear differential, small gears inside a rotating carrier mesh with side gears connected to the axle shafts. They allow one wheel to rotate faster as the other rotates slower relative to the carrier. The wheels remain connected to the drivetrain while adapting to the corner.

Your questions, explained.

What is an open differential?

It is a common differential design that allows different wheel speeds. Its limitation appears when one driven wheel has very little grip.

How is a limited-slip differential different?

A limited-slip design resists excessive speed differences and can send more torque to the wheel with better grip, depending on its design.

What does a differential lock do?

It couples the two outputs so they rotate together. That helps in some low-traction situations but removes their freedom to turn at different speeds.

Does the differential steer the car?

No. The steering system changes the direction of the steered wheels. The differential allows the driven wheels to rotate at the different speeds needed as the car follows that turn.

Explore the science

Go further with these engineering and manufacturer references.

VIEWING PATH · STEP 2 OF 3

Keep following the drive.

Three connected explanations: the gears, the wheels, and the clutch that brings them together.

  1. Start with the gears

    See how a gearbox trades speed for turning force.

    Full video · 4:35
  2. Follow the drive to the wheels

    Discover why the wheels need different speeds in a turn.

    Short · 31s · You are here
  3. Meet the clutch

    Connect the engine to the gearbox, and understand a stall.

    Full video · 2:05