Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Full video / Inside technology

How a Mechanical Watch Works: From Spring to Seconds

· Full video · 2:01 · By Howloft

See how a mechanical watch turns stored spring energy into measured motion, with the balance, hairspring and escapement working together.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Chapters & transcript

Jump to a chapter on YouTube, or read along with the English captions.

  1. 0:00 — How a spring measures time
  2. 0:15 — Mainspring and gear train
  3. 0:33 — Balance and hairspring
  4. 0:51 — The escapement
  5. 1:39 — Turning controlled steps into time
Read the English transcript

[0:00] A spring can make gears spin but how does it make them measure time? Inside this mechanical watch, a tiny wheel keeps stopping and starting and that interruption is essential to keeping time. Let's follow the energy.

[0:15] Winding the watch tightens the mainspring inside this barrel. As it unwinds, it powers a train of gears connected to the hands but gears alone don't set a steady pace. So what decides how fast they move? This swinging wheel called the balance works with a second,

[0:33] much finer spring, the hairspring. As the balance turns, the hairspring winds and unwinds, pulling it back toward the middle. Together they create a repeating rhythm but there's a problem. Friction would gradually weaken that motion until it stopped. The watch needs to take its timing from the balance

[0:51] while giving it enough energy to keep swinging. One tiny mechanism does both. The escapement. Watch this tooth. A ruby pallet on this fork holds the escape wheel still. As the balance swings through the middle,

[1:07] a tiny pin moves the fork and releases the wheel. Powered by the mainspring, the escape wheel advances. It pushes the fork which gives the balance a small impulse. Then the other ruby pallet catches a tooth,

[1:22] holding the escape wheel until the next release. The balance keeps swinging while the escape wheel waits. On the return swing, the exchange happens again. Unlock push lock. Those small pushes replace lost energy. The balance controls when the next release happens.

[1:39] Now pull back. The mainspring supplies the energy. The balance and hairspring set the rhythm. The escapement connects the two. Through the gearing, Those controlled steps become the movement of the hands. That's how this watch turns a spring into time.

[1:56] Subscribe to Howloft to see the hidden engineering around you.

Energy with a rhythm

Winding stores energy in the mainspring. The balance wheel and hairspring provide the rhythm, while the escapement controls how that stored energy passes through the mechanism toward the hands.

Lock, release and push

The escape wheel and ruby pallets do more than let gears spin freely. Their repeating lock-and-release action also gives the balance a small push to sustain its swing. The cutaway follows these parts through one controlled step and the return swing.

Your questions, explained.

What keeps the balance swinging?

The escapement gives it small pushes as the mechanism releases energy from the mainspring.