Jump to a chapter on YouTube, or read along with the English captions.
Read the English transcript
[0:00] Why does ABS ease a brake while your foot is still pressing the pedal? If a wheel is about to lock, the system briefly reduces pressure at that wheel. The wheel can turn more freely, then braking pressure can build again.
[0:16] That cycle helps preserve steering during hard braking. It doesn't create extra grip. It works within the grip the tires and road can provide. Watch this wheel. The brake pads squeeze its disc, slowing the wheel. But if braking overwhelms the available tire grip,
[0:33] the wheel can stop rotating while the car is still moving. A sliding front tire loses much of its ability to guide the car where you are steering. A wheel-speed sensor tracks rotation. The controller watches how wheel speeds are changing and looks for the signs of an approaching lockup.
[0:51] It can command the hydraulic unit to change pressure at the affected wheel, even while the driver keeps pressing the pedal. Here's the loop in slow motion. First, the valve unit can hold wheel-brake pressure. If the wheel still tends to lock, it reduces that pressure.
[1:09] As wheel rotation recovers, pressure can build again. The controller repeats these corrections as conditions change. The goal is controlled braking without prolonged wheel lock. Our animation slows the process so the pressure changes are visible.
[1:26] Why does a brake pedal sometimes pulse during an emergency stop? In conventional hydraulic ABS, fast valve changes and pump operation can send pressure pulses back to the pedal. The system is adjusting wheel braking to help prevent lockup.
[1:42] That feedback can be normal while ABS is active. Persistent vibration during ordinary braking, or a warning light, deserves a proper check; it isn't automatically an ABS event. ABS, traction control and stability control can
[1:58] share hardware, but they solve different problems. Here we're only following anti-lock control during braking. The tires still set the limits. ABS cannot make ice grip like dry asphalt, and it doesn't guarantee a shorter stop on every surface.
[2:14] Loose gravel and soft snow can change that comparison. So the brief pressure reduction has a purpose: give a wheel the chance to keep turning while you brake. For another pressure-control puzzle, watch what happens when a hydraulic press can't crush something.