03Pay outThe spool releases a controlled amount of belt.
Simplified torsion-bar principle; not a universal retractor design.
Transcript
Read along with the English captions.
Read the English transcript
Transcribed from the original English narration. Wording may contain transcription errors.
Why would a seat belt let webbing out during a crash? Because holding you back and limiting the force on your chest must happen together. A load limiter can allow controlled belt payout when the load reaches a design level. You gain a little more stopping movement while the belt continues restraining you. It has not unlocked. Too much movement creates another danger. So that controlled give must work with the airbag and the space ahead.
The belt yields without simply letting go.
Controlled payout after locking
In the illustrated design, the retractor locks one end of a torsion bar. Sufficient belt load twists the bar permanently, allowing the spool to release a controlled amount of webbing. The locking mechanism has not simply released.
A balance of load and movement
Allowing some movement can limit belt force, but it also uses space ahead of the occupant. The load limiter therefore works as part of the wider restraint system, alongside the belt geometry and airbag. Designs and thresholds vary.