Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Full video / Everyday engineering

What Happens When a Hydraulic Press Can't Crush Something?

· Full video · 2:23 · By Howloft

Follow a fixed-flow hydraulic circuit when the ram cannot move: a relief valve limits pressure, routes oil back to the tank and can produce heat.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Chapters & transcript

Jump to a chapter on YouTube, or read along with the English captions.

  1. 0:00 — When the ram stops
  2. 0:33 — Pressure builds against resistance
  3. 0:49 — How the relief valve opens
  4. 1:21 — Why the oil heats up
  5. 1:38 — Other circuits and limitations
Read the English transcript

[0:00] What happens when a hydraulic press can't crush something? In this simple fixed-flow circuit, the ram stops and a relief valve gives the oil another path. The pump is still turning. As resistance drives the pressure up, the valve starts opening and sends oil back to the tank.

[0:18] That limits the pressure and the available pushing force. Keeping the motor running doesn't give this press unlimited strength. Let's rewind to the first contact. Before the ram touches the object, oil entering the cylinder moves the piston.

[0:33] Once the object resists, pressure builds. If the force is enough, the object deforms and the ram keeps moving. If it isn't, movement can stop while the pressure climbs toward the system's limit. Inside our relief valve, a spring holds a small poppet against its seat.

[0:49] Oil pressure pushes on the other side. When that pressure force overcomes the spring force, the poppet lifts. The opening lets oil escape into the return line. This is a controlled route back to the reservoir, inside the hydraulic circuit.

[1:05] Watch the two paths. During the stroke, oil goes into the cylinder. At the stall shown here, most of the pump's flow goes through the relief path instead. The gauge can stay high even though the ram has stopped. Pressure and motion are different things.

[1:21] Why can hydraulic oil get hot when the machine isn't moving? In a simple fixed-flow circuit, a stopped cylinder doesn't necessarily stop the pump's flow. Oil can pass through the relief valve from high pressure back toward the tank. That pressure drop turns hydraulic energy into heat.

[1:38] So a motionless ram can still mean a working motor and warming oil. The energy has to go somewhere. Real presses can manage this differently. A pressure-compensated pump can reduce its output,

[1:54] and other controls can unload or stop the pump. Our animation isolates one basic relief-valve circuit. A relief valve limits pressure; it doesn't make crushing experiments safe or prevent every kind of failure.

[2:10] So when the object wins, follow the oil. The answer is hiding in the return path. To see the lifting side of hydraulics, watch how a tiny jack raises a car.

A stopped ram is not necessarily stopped flow

In the simple fixed-flow circuit shown, the ram can remain loaded and stationary while the pump keeps moving oil. The explanation follows the piston, spring-loaded relief-valve poppet, return line and reservoir to show the route the oil takes.

Pressure control and heat

Flow through the relief valve experiences a pressure drop that can turn hydraulic energy into heat. Real presses may instead reduce pump output, unload or stop the pump. The cutaway is illustrative, not a crushing test; a pressure relief valve does not make crushing experiments safe or prevent every failure.

Your questions, explained.

Do all presses keep pumping through a relief valve?

No. This video shows one simplified fixed-flow circuit. Other machines can reduce flow, unload or stop their pumps.

Explore the science

Go further with these engineering and manufacturer references.

VIEWING PATH · STEP 3 OF 3

Follow the force through hydraulics.

Start with a tiny piston, follow a complete jack cycle, then see what limits a hydraulic press.

  1. Start with a tiny piston

    See the force-versus-distance trade-off in one quick reveal.

    Short · 30s
  2. Follow one pump cycle

    Explore how the jack lifts a car and holds the load between strokes.

    Full video · 2:21
  3. Find the pressure limit

    Follow the relief path when a hydraulic press stops moving.

    Full video · 2:23 · You are here