Use the YouTube controls to play. This embedded player connects to YouTube; you can also watch on YouTube.

Full video / Everyday engineering

How a Tiny Hydraulic Jack Lifts a Car

· Full video · 2:21 · By Howloft

Trace one hydraulic-jack pump cycle through its check valves and lifting piston, then see how leverage and piston area trade travel for lifting force.

Watch on YouTube

Published by Howloft. Read our sourcing and corrections approach. Our visual models are simplified to explain the idea. Have a question or spotted something we should revisit? Tell us.

Chapters & transcript

Jump to a chapter on YouTube, or read along with the English captions.

  1. 0:00 — Two pistons and one-way valves
  2. 0:32 — Refilling the pump
  3. 0:47 — The lifting stroke
  4. 1:20 — Force, leverage and distance
  5. 1:52 — Lowering and safe support
Read the English transcript

[0:00] Push this handle down, and the car rises. But why doesn’t it drop when you lift the handle back up? The answer is hidden inside this tiny hydraulic jack. Inside, there are two pistons: a small one connected to the handle,

[0:16] and a much larger one that raises the lifting ram. Oil connects the working parts, and two one-way valves decide where it can go. Watch one complete pump. As the handle rises, the small piston pulls upward.

[0:32] Pressure in its chamber falls, opening the inlet valve and drawing oil from the reservoir. Meanwhile, the other valve stays shut, keeping the oil beneath the large piston from flowing backward. Now push the handle down.

[0:47] The small piston pressurizes the oil. The inlet valve closes, blocking the path back to the reservoir. When the pump pressure becomes high enough, the outlet valve opens and oil enters the main cylinder. That extra oil pushes the large

[1:04] piston upward, lifting the car a little. Raise the handle again, and pressure beneath the large piston keeps the outlet valve closed. The pump refills while the load stays raised. Each stroke adds another small amount of oil.

[1:20] That’s why the jack climbs in steps. But where does all that lifting force come from? First, the long handle gives you leverage. Then hydraulics multiply the force again. Pressure acts across the entire face of the large piston.

[1:37] A bigger piston area means a bigger lifting force at the same pressure. The trade-off is distance. Your hand travels a long way, over many strokes, while the car rises only a little. The jack multiplies force, not energy.

[1:52] To lower the car, a separate release valve opens a return path. The load pushes oil back into the reservoir, and the ram descends. Those valves explain how a jack lifts and holds, but a jack is for lifting.

[2:08] Never work beneath a vehicle supported by a jack alone. Small strokes. One-way flow. A heavy car rises. Subscribe to Howloft to see inside more everyday machines.

One pump cycle, two one-way valves

The cutaway follows oil as the pump refills and then sends another small amount beneath the lifting piston. Inlet and outlet check valves control the direction of flow, while a separate release path allows the load to be lowered.

More force, less movement

Handle leverage and a larger lifting-piston area increase lifting force, but the load moves a shorter distance than the hand. A jack multiplies force, not energy. This animation is not a lifting procedure: never work beneath a vehicle supported by a jack alone. Follow the manufacturers’ instructions and use suitable supports.

Your questions, explained.

Why does the load stay up between pumps?

Pressure beneath the lifting piston keeps the outlet check valve closed while the pump refills.

Explore the science

Go further with these engineering and manufacturer references.

VIEWING PATH · STEP 2 OF 3

Follow the force through hydraulics.

Start with a tiny piston, follow a complete jack cycle, then see what limits a hydraulic press.

  1. Start with a tiny piston

    See the force-versus-distance trade-off in one quick reveal.

    Short · 30s
  2. Follow one pump cycle

    Explore how the jack lifts a car and holds the load between strokes.

    Full video · 2:21 · You are here
  3. Find the pressure limit

    Follow the relief path when a hydraulic press stops moving.

    Full video · 2:23